TANDBERG D14049.04, Administrator'S Manual

Page: 223 / 296

223
D14049.07
March 2010
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications Maintenance
Command reference - xConfiguration
SIP Routes Route [1..20] Header Pattern: <S:0..128>
Regular expression to match against the specified SIP header field.
Note: this command is intended for developer use only.
Example:
xConfiguration SIP Routes Route 1 Header Pattern: "(my-event-package)(.*)"
SIP Routes Route [1..20] Method: <S:0..64>
SIP method to match to select this route (e.g. INVITE, SUBSCRIBE).
Note: this command is intended for developer use only.
Example:
xConfiguration SIP Routes Route 1 Method: "SUBSCRIBE"
SIP Routes Route [1..20] Port: <1..65534>
Specifies the port on the next hop for this route to which matching SIP requests will be routed.
Default: 5060
Note: this command is intended for developer use only.
Example:
xConfiguration SIP Routes Route 1 Port: 22400
SIP Routes Route [1..20] Request Line Pattern: <S:0..128>
Regular expression to match against the SIP request line.
Note: this command is intended for developer use only.
Example:
xConfiguration SIP Routes Route 1 Request Line Pattern: ".*@(%localdomains%|%ip%)"
SIP Routes Route [1..20] Tag: <S:0..64>
Tag value specified by external applications to identify routes that they create.
Note: this command is intended for developer use only.
Example:
xConfiguration SIP Routes Route 1 Tag: "Tag1"
SIP Routes Route [1..20] Transport: <UDP/TCP/TLS>
Determines which transport type will be used for SIP messages forwarded along this route.
Default: TCP
Note: this command is intended for developer use only.
Example:
xConfiguration SIP Routes Route 1 Transport: TCP
SIP Session Refresh Minimum: <90..7200>
The minimum value the VCS will negotiate for the session refresh interval for SIP calls. For further information refer to the definition of Min-SE header in RFC 4028 .
Default: 500
Example:
xConfiguration SIP Session Refresh Minimum: 500