202
D14049.07
March 2010
Grey Headline
(continued)
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Introduction
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Clustering and
peers
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications
Maintenance
Command reference - xConfiguration
Administration HTTP Mode: <On/Off>
Determines whether HTTP calls will be redirected to the HTTPS port.
On
: calls will be redirected to HTTPS.
Off
: no HTTP access will be available.
Note: you must restart the system for any changes to take effect.
Default: On
Example:
xConfiguration Administration HTTP Mode: On
Administration HTTPS Mode: <On/Off>
Determines whether the VCS can be accessed via the web interface. This must be
On
to enable both web interface and TMS access.
Note: you must restart the system for any changes to take effect.
Default: On
Example:
xConfiguration Administration HTTPS Mode: On
Administration HTTPS RequireClientCertificate: <On/Off>
Determines whether the VCS requires a valid client certificate from your web browser before setting up an HTTPS session. Note: this does not affect client verification of the VCS's server
certificate.
Default: Off
Example:
xConfiguration Administration HTTPS RequireClientCertificate: On
Administration SSH Mode: <On/Off>
Determines whether the VCS can be accessed via SSH and SCP.
Note: you must restart the system for any changes to take effect.
Default: On
Example:
xConfiguration Administration SSH Mode: On
Administration Telnet Mode: <On/Off>
Determines whether the VCS can be accessed via Telnet.
Note: you must restart the system for any changes to take effect.
Default: Off
Example:
xConfiguration Administration Telnet Mode: Off
Administration TimeOut: <0..10000>
Sets the number of minutes that an administration session (HTTPS, Telnet or SSH) may be inactive before the session is timed out. A value of
0
turns session time outs off.
Default: 0
Example:
xConfiguration Administration TimeOut: 0
