6.1.3 Configuration and operation
Switch on HCS-5300MX Digital IR Conference Room
Switcher, it will start initialization:
When the initialization is finished, the corresponding
state of input channels and output groups will be
displayed on the LCD:
Press the button at the front panel and go to the next
operation:
Press the “Menu” button to go to the main menu
which includes “Enable Update” and “About”.
“Enable Update”
a). Press the “
/
” button to switch to “Enable
Update” and press “MENU” to turn to next step;
b). Press the “
/
” button to select “Enable” or
“Disable”;
c). Press the “MENU” button to save and press
“EXIT” to turn to the upper level menu.
“About”
Press the “
/
” button to switch to “About” and
press the “MENU” button, the firmware version of
the switcher will be displayed on the LCD.
Channel switch operation:
Press the “INPUT 1…4” button to select the input
channel, the corresponding indicator lights up;
Press the “OUTPUT 1…4” button to select the
output group(s), the corresponding indicator lights
up, then the signal of the selected input channel
will be switched to the selected output group(s).
Press the selected “OUTPUT 1…4” button again
to deselect the selected output group(s). If the
input channel displays “X”, the output group is
closed and the corresponding indicator is off.
85
Summary of Contents for HCS-5300MA/80
