Taiden HCS-5300MA/80, Installation And Operating Manual

Page: 47 / 117

2.5.27 USB Audio Setting
Enable/disable USB audio function. The USB audio will
engage one SI channel.
a) Press the “

/

” button to select “Yes” or “No”;
b) Press the “MENU” button to save and return to the
upper level menu.
2.5.28 License
Install the Web Server process and see the licenses list of
the main unit.

When selecting “Install”:
a) Insert the U-disk and the Web Server process well be
installed automatically. “Success” will be displayed
on the LCD if the installation successful.
b) Reboot the main unit to enable Web Server.

When selecting “List”: see the licenses list.
2.5.29 Dante Audio Mode
Set Dante output mode.
a) Press the “

/

” button to select Dante output mode;

8 SI CHs: Dante output the signals of 0 to 7 SI
channels;

LINE OUT + 6 SI CHs: Dante output the signals of
LINE OUT1+LINE OUT2+0 to 5 SI channels;
b) Press the “MENU” button to save and return to the
upper level menu.
2.5.30 Set RS-232 Baudrate
Set the baudrate of RS-232.
a) Press the “

/

” button to select “9600” or
“115200”;
b) Press the “MENU” button to save and return to the
upper level menu.
2.5.31 Noise Elimination
Enable the noise elimination function for current
microphone or not.
c) Press the “

/

” button to select “Yes” or “No”;
d) Press the “MENU” button to save and return to the
upper level menu.
2.5.32 Line Out1 Noise Gate Setting
Enable/Disable the line out1 noise gate.
e) Press the “

/

” button to select “Enable” or
“Disable”;
f) Press the “MENU” button to save and return to the
upper level menu.
2.5.33 About
CMU information includes: firmware version,
corporation information and series number, as shown in
the following figure - press any button to return to the
upper level menu.
35