7.2 Digital infrared wireless main unit
Fault
Analysis
Solution
Cannot startup.
No power supply or no power cord
connected to main unit.
Connect the power supply with the power
cord.
7.3 Charging Unit
Fault
Analysis
Solution
The power indicating light is
not on when the unit is
powered on.
The power cord is not plugged into the
power socket.
Plug the power cord into the power
socket and supply power to the charging
unit.
The fuse has blown.
Change the fuse.
Please contact the local TAIDEN service
center.
The charging indicating light of
the charging lattice is not
lighting up though the battery
is plugged-in.
The battery is not properly plugged-in.
Plug-in the battery properly into the
charging lattice.
The charging contact is covered by
dust.
Please clean the charging contact with
dry cotton swab.
Battery working time is short.
Lithium-Ion battery deteriorated.
Please replace with new HCS-5300BAT
Lithium-Ion battery.
91
Summary of Contents for HCS-5300MA/80
