Taiden HCS-5300MA/80, Installation And Operating Manual

Page: 77 / 117

Figure 4.1:
1. Infrared transmitting/receiving glass – at the
frontage of the conference unit for transmitting/
receiving infrared signals.
2 . Charging indicator
3. Fully charged indicator
4. LCD – display for channel number, language name,
signal icon, battery capacity and emission angle.
5. Channel selector (note: operable only if earphone
is plugged)
6. Built-in loudspeaker – outputs floor audio; the
volume is adjusted by the main unit or by PC
application software. Mutes automatically when its
microphone is switched on.
7. Mic. On/Off button (with indicating light around)

Chairman unit: turn on/off mic if the number of
active mic is less than 4

Delegate unit:
a. Turn on/off mic in “Override” mode;
b. Turn on/off mic in “Open” mode if mic active limit
number is not yet reached;
c. Turn off mic in “Voice” mode if mic is activated;
d. Request to speak/turn off mic in “Apply” mode.

Indication light (according for the setting of the
main unit ):
Option State Mic. Button
Green For
Mic. On
Speaking Green Green
Apply Red Red
Voice
(no speaking)
Red Off
Red For Mic.
On
Speaking Red Red
Apply Green Green
Voice
(no speaking)
Green Off
8. Priority button (for chairman unit only)

If configured as “All mute”, all active microphones
will be muted temporarily when the priority button
is pressed and they will resume when the priority
button is released;

If configured as “All off”, all active microphones will
be turned off automatically when the priority button
is pressed;

If the chairman microphone is not active, pressing
the priority button to activate it;

If “Ring” mode was set as “On” in the main unit
configuration, pressing this button will emit a ring
tone.
9. 5 Multifunctional buttons (with indicator around)

Sign-in /Candidate 1/Response--
(“ATTEND/1/- -”):
a. In sign-in mode, sign-in indicating light will blink,
press this button to sign-in;
b. In questionnaire/opinion poll state of voting
mode, voting indicating light will blink, press this
button to vote for candidate 1;
c. In audience response/rating state of voting
mode, voting indicating light will blink, press this
button to give a response “0” of “100” (“- -”).

Yes/ Candidate 2/Response- (“YES/2/-”):
a. In parliamentary state of voting mode, voting
indicating light will blink, press this button to
approve;
b. In questionnaire/opinion poll state of voting
mode, voting indicating light will blink, press this
button to vote for candidate 2;
c. In audience response/rating state of voting
mode, voting indicating light will blink, press this
button to give a response “25” of “100” (“-”).

No/ Candidate 3/Response 0 (“NO/3/0”):
a. In parliamentary state of voting mode, voting
indicating light will blink, press this button to
oppose;
b. In questionnaire/opinion poll state of voting
mode, voting indicating light will blink, press this
button to vote for candidate 3;
e. In audience response/rating state of voting
mode, voting indicating light will blink, press this
button to give a response “50” of “100” (“0”).

Abstain/ Candidate 4/R
(“ABSTAIN/4/+”):
a. In parliamentary state of voting mode, voting
indicating light will blink, press this button to
abstain;
b. In questionnaire/opinion poll state of voting
mode, voting indicating light will blink, press this
button to vote for candidate 4;
c. In audience response/rating state of voting
mode, voting indicating light will blink, press this
button to give a response “75” of “100” (“+”).
Note:

Please let no object block infrared signals from
reaching the glass.
65