Taiden HCS-5300MA/80, Installation And Operating Manual

Page: 38 / 117

2.5.5 Downlink Audio Treble Setting
Adjust downlink treble of the floor, range: -15dB - +15
dB.
a). Press the “

/

” button to adjust;
b). Press the “MENU” button to save and return to the
upper level menu.
2.5.6 Monitor Setting
The audio input and output can be monitored with a
headphone at the monitor jack on the front panel of the
CMU.
“Monitor Setting” includes two submenus: “Monitor Ch.”
“Monitor Vol.”
a). Press the “

/

” button to select “Monitor Ch.” or
“Monitor Vol.”;
b). Press the “MENU” button to go to the next step;

“ Monitor Ch. ”
Select the audio channel to monitor, including: Line Out
1, Line Out 2, Interp CH:1 to Interp CH:7.
a). Press the “

/

” button to select the audio channel;
b). Press the “MENU” button to save and return to the
upper level menu.

“ Monitor Vol. ”
Adjust the monitor volume, range: -29 dB to 0 dB.
a). Press the “

/

” button to adjust (press and hold the
"

/

" button will adjust the value quickly);
b). Press the “MENU” button to save and return to the
upper level menu.
2.5.7 Headphone Auto Att. (Attenuation) Setting
If a headphone is plugged, howling may happen when
the microphone is activated. “Headphone auto att.”
function is used to suppress howling for floor language
channel. If enabled, the headphone audio signal will
decrease automatically by 12 dB.
a). Press the “

/

” button to select “Yes” or “No”;
b). Press the “MENU” to save and return to the upper
level menu.
2.5.8 Ring Setting
Select ring tone on/off on request to speak, when
chairman priority button is pressed or when timing
speech.
a). Press the “

/

” button to select ring on/off;
b). Press the “MENU” button to save and return to the
upper level menu.
2.5.9 Set Chairman Priority Mode
Priority includes two priority modes: “All mute”
“All off”
a). Press the “

/

” button to select priority mode
between “All Mute” and “All Off”;
b). Press the “MENU” button to save and return to the
upper level menu.

“All Mute”: when the chairman presses and holds
the “Priority” button, all active microphones will
mute temporarily; when the chairman releases the
“Priority” button, all temporarily muted
microphones will resume.

“All Off”: when the chairman presses the “Priority”
button, all active microphones will be deactivated.
26