5.2 Conference management
5.2.1 Assign unit ID to delegate
It will list all ID of connective units in the system. User can assign them to delegates, open microphones, set up the
camera predefine position, etc.. The interface is shown in the following figure:
Figure 5.3 Assign Unit ID to Delegate
ID:
IDs of all microphones, can be listed in ascending or descending order by clicking the triangle icon;
Delegate Name:
double click and input a name (at most 128 characters) to assign the unit to the delegate;
Operation:
turn on the microphones:
“Turn On”
：
click this button to open the microphone;
Panorama Setup:
set up the Panorama (refer to
5.2.5
);
Add:
wireless conference units must be added to the “Wireless Unit List” manually when being connected into the
system first or after being deleted. Click this button and the below dialog box is shown:
Select “Single” or “From…To…”, then input the ID number and select the unit type (single mic. or double mic.), at last
click the “Add” button. A maximum of 200 conference units can be added and their information will be displayed on the list
automatically.
“Delete All”:
delete all wireless units in the list.
Note:
Wired conference unit will be added into the list automatically once it is connected into the main unit.
Delete:
delete the selected wireless conference unit.
Note:
Wired conference unit will be deleted automatically when the “WiredMic Function Setting” in main unit menu is “No”.
74
Summary of Contents for HCS-5300MA/80
