Taiden HCS-5300MA/80 Installation And Operating Manual Download Page 52

Page: 52 / 117

Chapter 3 Digital infrared transceiver

3.1 Overview

The digital infrared transceiver manages the

communication between the main unit and the

conference units. It can be mounted onto the ceiling or

the wall for optional coverage or fixed onto a tripod at

any appropriate spot.

Types

：

HCS-5300TD/80

Digital

Infrared

Transceiver

(ceiling, wall or

tripod-mounted, suitable for less than 6 m height)

HCS-5300TDS/80

Digital Infrared Transceiver (suspension)

HCS-5300TH/80

Digital

Infrared

Transceiver

(ceiling, wall or

tripod-mounted, powered from HCS-5300M or power

adapter, suitable for higher than 6 m)

HCS-5300TW/80

Digital Infrared Transceiver (wall mounted, powered from

HCS-5300M or power adapter)

Summary of Contents for HCS-5300MA/80






















































































































Search results

Summary of Contents for HCS-5300MA/80

Reviews:

Related manuals for HCS-5300MA/80

Brands by name

Popular brands

Taiden HCS-5300MA/80, Installation And Operating Manual

Search results

Summary of Contents for HCS-5300MA/80

Reviews:

Related manuals for HCS-5300MA/80

Brands by name

Popular brands