2.5 Configuration and operation
Digital infrared wireless conference system main unit can
be configured and set up through menu operation with
four buttons. All menu items operation will be introduced
one by one in this section.
A) Starting initialization
Switch on and press the "STANDBY" button, the
HCS-5300M/80 digital infrared wireless conference
system main unit will start initialization:
B) Initial interface on LCD
The initial interface on the LCD includes:
“Menu”
“Mic’s”
“Mode”
Select and press the corresponding button which is
below the item and go to the next operation:
Press the “Menu” button to go to the main menu;
Press the “
” button to switch the maximal number
of microphones that can be turned on at the same
time: 1, 2, 3 or 4.
Press the “EXIT” button to switch microphone mode
among “Open”, “Override” and “Voice”:
“Open”:
If the maximal number of active microphones
(including chairman unit), previously fixed, has been
reached, a further delegate unit cannot be
activated
；
and the chairman unit still can be
activated when the total number of active
microphone is less than 4 in the system.
“Override”:
If the maximal number of active microphones has
been reached and if another delegate unit is
activated, the delegate unit switched on first will be
switched off first automatically (first in / first out). If
the total number of active microphone is less than 4
in the system, the chairman unit can be activated till
the number reaches 4 and then if another chairman
unit is activated, the unit switched on first will be
switched off first automatically (primarily switched off
the delegate units and then the chairman units).
“Voice”:
When delegates speak into the microphones at a
short distance, the microphones will be activated. If
the maximal number of active microphones,
previously fixed, has been reached, other delegate
units cannot be activated; and the chairman unit still
can be activated when the total number of active
microphone is less than 4 in the system.
C) Access main menu
Pressing the “Menu” button under initial interface will go
to main menu, which includes the following items:
“System Status”
“SI Channel and Booth Setting”
“Line In 2 Setting”
“Downlink Audio Bass Setting”
“Downlink Audio Treble Setting”
“Monitor Setting”
“Headphone Auto Att. Setting”
“Ring Setting”
“Set Chairman Priority Mode”
“Microphone Parameters Setting”
“Microphone Auto Off Setting”
“Carrier Use Sequence Setting”
“Language”
“Network Setting”
“Time Setting”
“Video Tracking Setting”
“SI Channel Parameters Setting”
“Headphone Mute Speaker”
“Alarm Setting”
“Parameters Backup/Restore”
“Voice Mode Setting”
“WiredMic Function Setting”
“Number”
“Mic. IR Strength Settting”
“Mic. Led Setting”
“Audio Mode Setting”
“USB Audio Setting”
“License”
22
Summary of Contents for HCS-5300MA/80
