“Dante Audio Mode”
“Set RS-232 Baudrate”
“Noise Elimination”
“Line Out1 Noise Gate Setting”
“About”
“About Dante”
Press the “MENU” button to go to the corresponding
submenus;
To switch from term to term use the “
/
” button;
To exit the current menu and to return to the upper
level menu use the “EXIT” button.
2.5.1 System Status
“System Status” submenu includes:
“Carrier Using Status”
“Microphone Battery Status”
“Carrier Using Sequence”
a) Carrier Using Status
Use the “
/
” button to select “Carrier Using Status”
and use the “MENU” button to confirm.
The status of every channel and the status of the active
microphone(s) will be displayed.
The example figures unit with ID “2” and “4” on channel 1
and channel 3, and their signal intensities are “M”
(middle) and “H” (high). “L” means the signal is low and
“X” means there is no signal received. Two more
channels are available. The signal will be null when “Mic.
IR Automatic Adjusting” is set “No”.
b) Microphone Battery Status
Use the “
/
” button to select “Microphone Battery
Status” and use the “MENU” button to confirm.
The ID, voltage and residual time of the active
microphone(s) will be displayed.
The example figures that unit with ID “39” is activated. Its
voltage is 12.36 V and its residual time is 13 hours.
c) Carrier Using Sequence
Use the “
/
” button to select “Carrier Using Sequence”
and use the “MENU” button to confirm.
The sequence of the carriers will be displayed.
2.5.2 SI Channel and Booth Setting
In “SI Channel and Booth Setting” submenu, the
following parameters need to be set up:
“Number of Channel(s)”
“Language for Channel”
“Number of Booth(s)”
“Language for Booth”
“Auto-Relay Booth Setting”
“Distribute Floor to Used SI Channel”
“Switch Outgoing CH. When Mic On”
“Interp. Units Green LED”
“Interpreter Units Display Real Time”
a) Select Number of Channel(s)
Use the “
/
” button to switch between 0-7;
Note:
If there are wired conference units connected,
the maximal number of channels is 3.
23
Summary of Contents for HCS-5300MA/80
