Tadiran Telecom Coral IPx 500, Installation Manual

Page: 493 / 544

Shared Service Ports
9-65
M
u
sic Backg
rou
n
d a
n
d Music-On-Hold
(M1
/M
2
)
9
0
Each Coral IPx 500 main cage provides two music sources;
M1 (External/
Internal
selectable) and M2 (External)
.
The Music feature requires the appropriate definitions in the database. Consult the
Program Interface (PI) and Database Reference Manual for instructions on the database
programming required for Music.
The following parameters must be set, to enable the Music
feature.
1. Page-Q (Route: ROOT,0,7)
Use this field to determine which music source will be used when a call is placed
on a specific queue. Refer to
Chapter 23 - Page_Q Music
, in the
Program Interface
(PI) and Database Reference Manual , for more details.
2. SLT_Def
(Route: SLT)
Use the MUSIC_ON_HOLD/TRANSFER field to determine which music source
will be used when a call is placed on hold by the relevant port.
3. E&M_Def (Route: TRK,1)
Use the MUSIC_ON_HOLD/TRANSFER field to determine which music source
will be used when a call is placed on hold by the relevant port.
4. KEYSET_Def (Route: KEY)
Use the MUSIC field to activate or cancel background music for a specific keyset.
Use the MUSIC_NUM field to determine which music source will sounded.
Use the MUSIC_ON_HOLD/TRANSFER field to determine which music source
will be used when a call is placed on hold by the relevant port.
5. Hunt Group (Route: HUNT)
Use the MUSIC_SOURCE field to determine which music source will sounded for
callers that queue on the group.
Use the RETAIN_HUNT_MUSIC_SOURCE field as described in Chapter 9 , in the
Program Interface (PI) and Database Reference Manual .
6. Gains Table (Route: ROOT,0,1,3)
Entry #11 of the gains table can be used to set gain parameters to the music
sources. These parameters set the transmission value levels of the music while in
CONNECT state with any possible port in the system. For more information see
Chapter 19 in the Program Interface (PI) and Database Reference manual .
7. WAIT_QUE (Route: ROOT, 7, 3)
The following three fields MUSIC/TONE, MUSIC_SOURCE# and
RETAIN_WAIT_Q__SOURCE are used to activate WAIT_Q features. For more
4 Database Programming