Tadiran Telecom Coral IPx 500, Installation Manual, Page: 453 / 544

Shared Service Ports
9-25
IPx 50
0X Ba
ckpla
ne Main
Service Peri
pheral
Boar
d in
si
de th
e IPx 50
0X Cage
9
9.3
IPx 500X Backplane
Main Service Peripheral Board inside the IPx 500X
Cage
0
Figure 9-6
illustrates the MSPipx card circuits layout. The MSPipx card does not
provide shared service functions. The MSPipx card uses the main shared service
functions provided by the MSBipx card as described in
page 9-1, Embedded Shared
Service Circuits in the IPx 500M Main Cage
.
In the PI system database, the expansion cages are shown as:
„
First expansion - Location: Shelf #1, Slot #1-10
„
Second expansion - Location: Shelf #2, Slot #1-10
Refer to the Program Interface (PI) and Database Reference Manual , Chapter 6 - Card List ,
for further details.
The MSPipx card houses:
„
Configuration jumpers
„
Power supply connector for the PS500 unit
„
Expansion circuit that links to IPx 500M or second IPx 800X cages
„
Ten universal connectors for peripheral cards
The MSPipx card is equipped with jumper straps (JU1 - JU8) that enable various
functions. Before installing the PS500 power supply, the jumpers on the MSPipx card
are set to their correct positions (see
Figure 9-6
).
1 General Description
2 Configuration Jumpers
Jumper Purpose
JU1, JU3,
JU5, JU7 Synchronization jumpers. See
page 10-15, Digital Trunk Synchronization
JU2, JU4,
JU6, JU8 Shelf number jumpers. See
page 6-37, Expansion Shelf Number