Tadiran Telecom Coral IPx 500, Installation Manual

Page: 79 / 544

Hardware Installation Procedure
2-37
Eq
uip
m
ent Insta
lla
tio
n
2
Unpacking the Shipping Container
1. Inspect the shipping container for evidence of physical damage or mishandling.
Report any damage to the carrier immediately.
2. If it is necessary to make a damage claim to the carrier, do not move the container
until it has been examined by a representative of the carrier. Otherwise, before
opening, move the container as close as possible to the installation area.
3. Using a utility knife, carefully cut the tape securing the top flaps of the container
and open the flaps.
4. Remove any parts in the depressions of the top foam insert.
5. Remove the top foam insert and set aside.
6. Grasp the ends of the MDF and lift it out of the container. Place the MDF on a
stable surface.
7. Inspect the MDF covers for shipping damage.
8. Check the parts list and verify that all the items are present.
Table 2-8
through
Table 2-9
list some of the components that are supplied with the wall-mounted
MDFipx unit.
„ Table 2-8
- MDFipx unit components supplied with accessories
„ Table 2-9
- MDFipx unit components supplied without accessories
9. Remove any other MDF items from the shipping container, and move the
container so that it does not interfere with the remaining installation procedures.