Tadiran Telecom Coral IPx 500, Installation Manual

Page: 137 / 544

Initial Power-up Tests
3-17
Per
ipheral
In
te
rf
ace Ca
rd Ini
tia
li
zat
ion
3
Interface & Database Reference Manual for more information. Using the PI, verify
that each of the parameters detailed below contain the appropriate information.
7. Access the card list branch of the PI (Route: CLIS) to verify that the cards are
properly recognized and initialized by the Coral IPx 500 main cage MCP-IPx
processor.
The following table appears on the PI terminal:
The following is an explanation of the CLIS fields:
Shelf Number............ In Coral IPx 500, the main cage is designated shelf # 0; the first
expansion cage is labeled shelf #1; the second expansion cage is
labeled shelf #2.
Slot Number .............. Identifies the slot location of the indicated card for display. In the
main cage, the range of slot numbers is 1-8; in the expansion
cage, the range of slot numbers is 1-10.
I_TYPE........................ This field should show the required card name.
If the I_Type lists a different card type this indicates that the card
slot has been previously initialized by a different card type. That
card must be relocated to a clear card slot (where the I_Type field
shows NO_CARD) or the current card slot assignment must be
cleared throughout the PI.
P_TYPE....................... Shows the card type currently located in the slot.
CDB............................. Allows modifying the card database set assigned by the system.
When not applicable for the card, --- is displayed in this field.
Version, Subversion.. Provides information on the card software set loaded. For display
purposes only.
Status .......................... The information provided in this field helps you to troubleshoot
card initialization problems. See
Table 3-1
.
8. Verify that the cards are identified properly in the card list branch of the system
database
(Route: CLIS)
. The different card slot STATUS messages are described
below in
Table 3-1
.
9. Verify that the STATUS field indicates ACTIVE for each of the cards installed.
If another message is displayed, see
Table 3-1
. For a complete list of card slot
status messages, see Chapter 6 of the the Program Interface & Database Reference
Manual .
shelf/slot I_TYPE P_TYPE CDB version subversion status
0 / SLOT No. CARD_NAME CARD_NAME XXX XXX XXX ACTIVE