Tadiran Telecom Coral IPx 500, Installation Manual

Page: 81 / 544

Hardware Installation Procedure
2-39
Eq
uip
m
ent Insta
lla
tio
n
2
Mounting the MDFipx onto the Wall
1. Verify that four holes have been drilled (for each MDFipx unit) into the wall, as
described on
page 2-24, Attaching the Wall Mounting Bracket onto the Wall
, using the
installation template provided. See
Figure 2-21
.
Figure 2-21 Coral IPx 500
MDFipx Unit Blueprint
Position (not in scale)
2. Remove the MDFipx Cover. See
page 5-27, Removing the MDFipx Cover
.
3. Secure the MDFipx unit onto the wall with four M4 screws provided.
4. If the MDFipx unit does not include the cables attached:
a. Determine the best route for the I/O cables. If either the opening on the top
cover or on the right panel of the MDFipx is the best route, remove the
knock-out panel so that the cables can be inserted. See
Figure 2-22
. To remove
the panel, position a cutter adjacent to the perforated section, and cut your way
through the perforation until the part drops free.
b. Attach the I/O cables to MDFipx unit as described on
page 5-30, MDFipx Field
Assembly for Units without I/O Cables Supplied
Figure 2-22 Top View
and Right Side View of
MDFipx Cover Knock-Out
Panel Removal
110mm
72.6mm
475mm
330mm
35
0m
m
16
5mm
First
MDF
Unit
Coral IPx 500 Cage
Wall Mounting Bracket
Second
MDF
Unit
144
.6
mm
110mm
Knock-out
panel location
Knock-out
panel
Knock-out
panel location
Knock-out
panel
Top view Right Side View