T-VIPS CP525 cMux User Manual Download

Page: 11 / 292

History

ID: um_tsmux

CP525 cMux User’s Manual Rev. 5.20.12 (3944)

1 History

Revision Date

Comments

5.20.10

2012-12-17 – Added description of Copy Inputs.

– Added SFN synchronization for Seamless SFN operation.

5.18.0

2012-08-30 – Updates to Auto Remap functionality.

– Default priority queues description.

– Other minor changes.

5.16.0

2012-08-30 – IP/RTP diversity feature added.

– PSI/SI/PSIP editor feature added.

– Auto remapping of PIDs feature added.

5.2.0

2011-07-08 – Scrambling pages moved

– Added BISS description

5.0.0

2011-05-11 – Description of Forward Error Correction GUI pages included

– Correction of Inputs section

4.8.0

2010-11-25 – Updated with descriptor adding/removing/replacing of components.

4.6.0

2010-08-13 – Port switching feature added.

– Format selection for output ports in

Section 8.4.3

ATSC+DVB mode to select between ASI or SMPTE 310M per output copy.

– New 10 port ASI card HW option.

– Number of resyncs on IP input status page

Section 8.6.2.3

– Override source IP option field on IP TX parameters.

– Added service details and playout content view on output outgoing views in

Section

8.7.2.11

4.2.40

2010-06-21 – Updated with support for SFP slot.

– Some syntactical updates and general maintenance.

4.2.18

2010-04-21 – Updated for Ethernet data functionallity and Scrambling

1.4

2010-01-04 – Minor changes related to PSIP handling

1.2

2009-07-13 – ATSC version

– Added ATSC/SMPTE 310M information.

– Updated GUI images and fixed some typos.

1.0

2009-01-21 – First version

– This manual is based on manual for CP515

Summary of Contents for CP525 cMux





































































































































































































































































































Search results

Summary of Contents for CP525 cMux

Reviews:

Related manuals for CP525 cMux

Brands by name

Popular brands

T-VIPS CP525 cMux, User Manual

Search results

Summary of Contents for CP525 cMux

Reviews:

Related manuals for CP525 cMux

Brands by name

Popular brands