T-VIPS CP525 cMux, User Manual

Page: 81 / 292

WEB Interface 81
ID: um_tsmux CP525 cMux User’s Manual Rev. 5.20.12 (3944)
character. The default value for the delimiter is
;
. The character used may affect auto-
importing of the exported file into your favourite tool used to inspect the file content.
Columns
Each of the columns in the alarm log table has a checkbox. Columns that are selected are
shown on the alarm log page.
8.4.3 Port Mappings
Figure 8.13 ASI
port direction control
This page offers an interface to configure the direction of the installed ASI ports. The valid
options are visible as selectable radio buttons for each port.
The number of ports shown in the port map grid corresponds to the number of physical con-
nectors installed in the chassis and the meaning of the different choices are:
Mode
Direction of the port, with two choices:
Input
Use the port as an ASI input to the multiplexer. All input ports can be used, but the
number of inputs that can be enabled simultaneously is limited by the licence key
Number of input ports activated .
Output-Copy
Use the port as an ASI output, transmitting the multiplex generated by the unit.
The valid selections are also documented in Section 6.1.2 .
Format
Additional option for output ports, only available in ATSC+DVB mode. This option makes
it possible to transmit both ASI and SMPTE 310M simultaneousy, the ports carrying the
same content.
ASI/310M
The format on the output port follows the format configured on the TS-OUT port.
ASI
The port is always using ASI, even when the TS-OUT is configured to SMPTE 310M.