manualshive.com logo in svg

T-VIPS CP525 cMux, User Manual

The T-VIPS CP525 cMux is an advanced multiplexer, ensuring seamless transmission of digital signals. With its intuitive user interface, operating the device is effortless. To maximize user convenience, we are offering a comprehensive user manual that can be easily downloaded for free from our website, ensuring a seamless setup and operation experience.

Share
Download
background image

WEB Interface

201

ID: um_tsmux

CP525 cMux User’s Manual Rev. 5.20.12 (3944)

Playout arbitration mode

This parameter selects arbitration characteristics for playout of EIT schedule sections. This
mode only has effect when a specific table ID (e.g. 0x50) is split into two or more groups
with different repetition rates.

The pull-down list provides a choice of values. The value chosen determines the number
of sections that will be played out in sequence at a time for a given table ID. The meaning
of the different values are:

Section

Sections from different groups can be played out in any order. Segments from different
groups may be interleaved.

Segment

When playout of one segment (8 sections) start, it will not be interrupted by other
segments until playout of the current segment is complete.

Group

Playout of one group (several segments) must be completed before any other group
will be allowed to transmit segments. This mode will lead to quite large variations in
measured repetition rate, but the playout sequence will be orderly.

The default value for EITs playout arbitration mode is "Segment".

Use constant section interval

This parameter is only effective when the arbitration mode is set to "Section". The parameter
specifies how the sections of a particular table (indicated by a table ID) will be played out.
If set to true, the player will calculate an

average

section repetition interval for all groups

and play out exactly one section at the end of each interval. If set to “false”, each group
will be played out independent of each other. Sections within each group will have a
distance that corresponds to the repetition interval for sections within that group only. If
the arbitration mode is set to “Segment” or “Group” a constant section interval will always
be used.

The "Use sliding window", "Use expired events" and "Expired Actual Interval/Other In-
terval" options are not supported yet, but may become available in the future.

Groups

The EIT schedule can be divided into up to 4 different groups with different playout
intervals, each group consisting of an integer number of days (1 quarter of a sub-table).
This is typically used to configure faster playout of the EIT data for the first days, and
slower repetitions for EIT data for later days.

When setting a group to 0 days the group is not used.

8.7.2.8.3 EIT/ETT Sch

This page is not available when the output is in DVB mode.

Summary of Contents for CP525 cMux





































































































































































































































































































Reviews:

No comments

Related manuals for CP525 cMux

Omega HHM9007R User Manual preview
HHM9007R
Brand: Omega Pages: 21
VAR DV-71600 Manual preview
DV-71600
Brand: VAR Pages: 6
Raisecom RCMS 2811 User Manual preview
RCMS 2811
Brand: Raisecom Pages: 29
Morris 57044 Operating Instruction preview
57044
Brand: Morris Pages: 13
Morris 57030 Operator'S Manual preview
57030
Brand: Morris Pages: 9
Velleman DVM830 User Manual preview
DVM830
Brand: Velleman Pages: 30
Gossen MetraWatt METRAHIT EBASE Operating Instructions Manual preview
METRAHIT EBASE
Brand: Gossen MetraWatt Pages: 72
Gossen MetraWatt METRA HIT 28 S Operation Instructions Manual preview
METRA HIT 28 S
Brand: Gossen MetraWatt Pages: 80
TECPEL DMM8060 Operating Manual preview
DMM8060
Brand: TECPEL Pages: 10
Mastech M266 Series User Manual preview
M266 Series
Brand: Mastech Pages: 12
Fieldpiece LT17A Operator'S Manual preview
LT17A
Brand: Fieldpiece Pages: 2
ETEKCITY MSR-C600 Operating Manual preview
MSR-C600
Brand: ETEKCITY Pages: 16
ETEKCITY MSR-A2000 User Manual preview
MSR-A2000
Brand: ETEKCITY Pages: 40
Rishabh 410 User Manual preview
410
Brand: Rishabh Pages: 32
Radio Shack 2200087 User Manual preview
2200087
Brand: Radio Shack Pages: 28
East Coast Datacom Nx8- Dual Composite MUX High-Speed 16-Port TDM... Operation Manual preview
Nx8- Dual Composite MUX High-Speed 16-Port TDM...
Brand: East Coast Datacom Pages: 77
National Instruments 776572-00 User Manual preview
776572-00
Brand: National Instruments Pages: 128
YOKOGAWA 733 01 User Manual preview
733 01
Brand: YOKOGAWA Pages: 2

Brands by name

Popular brands

Load more brands