T-VIPS CP525 cMux, User Manual

Page: 129 / 292

WEB Interface 129
ID: um_tsmux CP525 cMux User’s Manual Rev. 5.20.12 (3944)
Ethernet Bitrate
The currently received bitrate in Mbit/s, measured at the Ethernet level.
Seq.Err.
The number of RTP sequence errors reported by the input since the last reset of statistics.
RTP sequence error measurements requires the RTP protocol is present in the received
stream.
Status
The current alarm status of the input is shown as a coloured indicator; the colour indicating
the highest severity level of the active alarms. If the port is disabled the indicator is grey.
Below the table four values are shown. The first one is the total Ethernet bitrate received. The
last three are identical to the three values for ASI inputs described in the previous section.
The
Add IP
and
Remove IP
buttons at the bottom of the page lets the user add or remove IP
inputs.
After clicking the Add IP button the Apply button must be clicked before the channel parameters
can be edited. A new channel is shown with a plus sign in the navigator until it has been edited
(and the edit applied).
8.6.1.2 Switch Inputs
If the unit is equipped with the Input switching feature, the Switch Inputs tab is shown on the
Inputs Overview page. The page lists the defined input switches and offers controls to add and
remove switch inputs.
Figure 8.54 Inputs Overview - Switch Inputs