T-VIPS CP525 cMux, User Manual

Page: 254 / 292

254 Examples of Use
CP525 cMux User’s Manual Rev. 5.20.12 (3944) ID: um_tsmux
3. Press the Scrambling tab in the Service config dialogue.
4. Set the following scrambling settings on the service, and press OK :
− Scrambling mode: Scramble
− Video/Audio scrambling: BISS1
− Signalling: Service
Note: You may set scrambling for each individual component. This is
done by editing each individual component in the service and the setting
the same settings as above.
Generate tables
1. Navigate to the Outputs page, and select the Tables sub-tab.
2. Set PAT and PMT to Playout Regenerated .’
Note: Setting of the scrambling flag in SDT is done under the General
tab in the Service Config dialogue.
10.9.1 Verify scrambling setup
The CP525 analyses it’s own output, such that one is able to see if the correct PID’s are scrambled,
and that they are signalled.
1. Navigate to the
Outputs
page, and select the
Outgoing
sub-tab.
2. Select the PIDs subpage. In the leftmost Info colomn a blue padlock will be shown if
the PID is scrambled.
3. Select the Services subpage. Verify if the signalling of BISS is set correctly for each
service and component.
10.10 Conditional Access
10.10.1 Scrambling
Setting up the scrambler consist of two phases; setting up an ECM connection for exchang-
ing control words (CWs) for ECMs, and selecting individual services and/or components for
scrambling.