ON
FWD ONLY
FWD
OFF
Explanation of Symbols Used
Symbols for Operating the Device
Indicates the ON position of the Mode
Switch
Indicates the Forward Only (FWD ONLY)
and Forward (FWD) position of the
Mode Switch
Indicates the OFF position of the
Mode Switch
Indicates that the Mode Switch can be
PUSHED to change between modes
Indicates the Forward Trigger
Indicates the Reverse Trigger
Indicates to press the Forward and
Reverse Triggers at the same time for
Oscillating Drilling Mode
Indicates that the release buttons can be
PRESSED to remove attachments
Indicates that the casing cover can be
opened by PRESSING the casing opening
button
Indicates which direction the front lid
should be rotated to open the casing
cover
Indicates how the sterile cover is placed
on top of the handpiece and removed
from it during the aseptic transfer
Reverse Function is possible with the
Attachment
Size of the Burr Attachment
Lock and Unlock the tool in the
Attachment
Indicates where the Oscillating Saw
Attachment can be inserted in the
handpiece
Indicates that the sleeve can be adjusted
to fit a suitable Kirschner Wire by simulta-
nously pressing and turning it axially
against the handpiece
Battery Level Indicator
Service Indicator on Power Unit. If the red
LED lights up do not use the Power Unit
further as it must be replaced
Information Button on Power Unit.
By pressing it briefly the battery level is
shown on the Battery Level Indicator.
By pressing it for 8 seconds the self-test of
the Power Power Unit is run
51
UNIUM
™
• Instruction for Use
