Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual Download Page 446

Page: 446 / 503

Deployment Solution

446

Error Codes

Client Error Messages

Error Message

Description

"The master PC ended the
transfer before we received
all of the data."

Explanation:

The Master computer sent a "goodbye" packet

before the image-transfer was finished. The download didn't
finish, so the client disk will be in an indeterminate state.

Possible cause:

The user aborted the download before it was

complete.

"Error: Received cluster
chunk with wrong version . .
. (want .. .)."

"Client and master versions
do not match."

"Error: Received cluster map
with wrong version . . ."

"Error: End of Block packet
has wrong version . . . (want
. . .)."

Explanation:

The Master computer sent a packet with the

wrong version number.

Possible cause:

The Master computer and clients are

running different versions, and there are packet-header
differences.

Action:

Ensure both master and client programs are updated

to the same software version.

"Error: Received Wrong
NetBlock . . . (expected . .
.)."

"Received Wrong segment .
. . (expected . . .)."

Explanation:

The Master computer moved on to the next

segment in an image transfer before the client successfully
received the data in the previous segment.

Possible cause:

The client may have lost contact with the

Master computer during a download.

"Error: Master started before
we could register."

Explanation:

The client received an unknown packet before

it was ready to begin the download.

Possible cause:

The "download confirmation" packet sent

from the Master to the client is lost.

Action:

Re-send the image.

"Error decoding buffer."

"Error while getting image
info from master."

Explanation:

The client was unable to decode packet or

image information.

Possible cause:

Data corruption in a packet somewhere

between the Master computer and the client (likely), or a bug
in either the master or client software (much less likely).

Action:

Call Altiris if you see this message and you believe

your network is operating reliably.

Summary of Contents for ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0
























































































































































































































































































































































































































































































































Search results

Summary of Contents for ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0

Reviews:

Related manuals for ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0

Brands by name

Popular brands

Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0, Manual

Search results

Summary of Contents for ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0

Reviews:

Related manuals for ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0

Brands by name

Popular brands