![Svantek SV 971A User Manual Download Page 86](http://html1.mh-extra.com/html/svantek/sv-971a/sv-971a_user-manual_1409270086.webp)
SV 971A User Manual
86
3. Go to the
Area
position and press the ► key. In the
File Manager
screen create a new area directory
<New Dir.>
or select the directory of the previously
created Area in the selected Project.
►
After creation of a new area directory or selection of
the existed one press
<Enter>
and the selected
area name will be displayed in the
Area
position of
the
STIPA Sett.
screen.
<ENT>
4. Go to the
Source
position and press the ► key. In
the
File Manager
screen create a new source
directory
<New Dir.>
or select the directory of the
previously created Source in the selected Area.
►
After creation of a new source directory or selection
of the existed one press
<Enter>
and the selected
source name will be displayed in the
Source
position of the
STIPA Sett.
screen.
►
5. Select the
Averaging
type:
Manual
or
Auto
.
Manual averaging means that you may perform as
many measurements for the measurement point as
you heed, and you will decide when to stop series
of measurements by using the
Complete
command
– see Chapter
►
Automatic averaging assumes that the measurements will be averaged according to IEC 60268-
16:2011 which assumes two types of averaging
– for standard measurements (
60268-16x2
) and for
measurements with fluctuating noise (
60268-16x3
). In the standard abbreviation
x2
means that no
less than two measurements should be made, and
x3
means that no less than three measurements
should be made. When the automatic averaging is selected, additional position
Standard
appears
in the
STIPA Settings
screen.
6. In case of automatic averaging, choose the
Standard
that defines the averaging type:
60268-16x2
or
60268-16x3
.
In the automatic averaging mode,
you make
measurements the same way as in the manual
mode. The difference is that in automatic mode, the
instrument decides when to end the series of
measurements and ends it automatically when the
appropriate condition is met.
►
Summary of Contents for SV 971A
