Svantek SV 971A, User Manual

Page: 50 / 305

SV 971A User Manual
50
5.1.2 Three profiles view
In the 3 Profiles view, any three measurement results,
selected in the Disp. Res list, may be presented for
three profiles. You may change the 3 Profiles sub-view
by pressing the <Enter> key.
<ENT>
3 Profiles view fields
1. Result for the first profile
2. Result for the second profile
3. Result for the third profile
4. Implemented weighting filter: A , C , Z or B and
detector time constant: I (Impulse), F (Fast), S
(Slow) when the detector is exponential or L when
the detector is linear
Changing measurement results
To change the result of the profile, you should select the
profile with the
▲
/
▼
key pressed with <Shift> and then
change the result with the
◄
/
►
key.
The statistical levels can be changed with the
◄
/
►
key
pressed with <Shift> .
▼
5.1.3 Logger view
In the Logger mode, the history results, selected in the
Logger View list, are displayed as a plot. You may
change the active history plot with the <Enter> key.
The cursor position can be changed with the
◄
/
►
key.
<ENT>
Logger view fields
1. Logger Plot
2. Result value for cursor position
3. Result name (Profile number)
4. Cursor time position
Note: If Logger (path: <Menu> / Measurement / Logging /Logger Set.) is switched off the
Logger presentation mode is disabled! Therefore, to have this presentation mode active,
switch the Logger on!
Note: When Logger is switched on, but results were not selected for logging the Logger
presentation mode is disabled!
1
2
3
2
3
4
1
4