Svantek SV 971A, User Manual

Page: 259 / 305

SV 971A User Manual
– Appendixes
259
This transmitter meets both portable and mobile limits as demonstrated in the RF Exposure Analysis and SAR
test report. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with FCC multi-transmitter product procedures.
ISEDC Statements:
This radio transmitter has been approved by Industry Canada to operate with its embedded antenna. Other
antenna types ar
e strictly prohibited for use with this device. This device complies with Industry Canada’s
license-exempt RSS standards. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Exception from routine SAR evaluation limits are given in RSS-102 Issue5. BGM121N meets the given
requirements when the minimum separation distance to human body is less than equal to 15 mm. RF exposure
or SAR evaluation is not required when the separation distance is 15 mm or more.
BGM121A module has been tested for worst case RF exposure. As demonstrated in the SAR test report,
BGM121A and BGM123A can be mounted in touch with human body without further SAR evaluation.
Environmental parameters
•
Working temperature range -10

C

+50

C
•
Storing temperature range -20

C

+50

C (-30

C

+60

C without batteries)
•
Humidity 90% RH in 40

C (uncondensed vapour)
•
Ingress Protection Code IP 54
Weight with batteries 225 g (including microphone and preamplifier).
Dimensions 20 x 56 x 232 mm .
Compliance with EU Directives (see Chapter C.6)
CE mark indicates compliance with RED Directive 2014/53/EU:
•
Art 3.1a: Safety
•
Art 3.1b: Electromagnetic Compatibility
•
Art 3.2: Radio.
Note: Electromagnetic compatibility is guaranteed only with the original accessories supplied
by SVANTEK!