Svantek SV 971A, User Manual

Page: 128 / 305

SV 971A User Manual
128
Level Threshold level of Source for triggering condition
fulfilment.
Chapter
4.5.3
Pre Trigger Period of additional logging before triggering
condition fulfilment. Chapter
4.5.3
Post Trigger Period of additional logging after triggering
condition fulfilment. Chapter
4.5.3
Wave
Recording Recording of the waveform signal in the wave file.
Chapter
4.5.4
Recording
Switching on the signal recording: Continuous or
on trigger: Slope+, Slope -, Level+, Level
–,
G, Trigger Chapter or Integr. Period .
Continuous means that the waveform signal will be
recorded continuously from the start of the
measurement till its end. On trigger recording put
additional conditions for triggering and ending of the
recording.
If the instrument is waiting for the trigger condition,
the appropriate trigger icon is flashing on the display
alternatively with the „signal” icon.
Chapter
4.5.4
Slope+
Type of trigger that starts the signal recording for
Recording Time under the condition: rising value of
the LEQ result ( Source ) integrated during 0,5 ms
passes above the threshold level ( Level ).
Chapter
4.5.4
Slope - Type of trigger that starts the signal recording for
Recording Time under the condition: falling value of
the LEQ result ( Source ) integrated during 0,5 ms
passes below the threshold level ( Level ).
Chapter
4.5.4