Suzuki Movano Owner'S Manual Download Page 35

Page: 35 / 353

Keys, doors and windows

The power side step operates

automatically when the sliding door is

opened or closed.

Warning

Ensure there is adequate

clearance to allow the power side

step to fully extend and retract

without obstruction.

The indicator illuminates during

operation of the power side step. If it

remains illuminated with the door

closed, the step has not retracted, or

the door has not fully latched into its

locking position.
In the event of a failure, manually

retract the power side step by

unscrewing the orange handwheel

located at the rear of the step,

ensuring that there are no obstacles

preventing closure. When the step is

retracted, screw in the orange

handwheel. Seek the assistance of a

workshop.

Rear doors

Lock and unlock the rear doors with

the remote control or key (if

equipped).
Central locking system

24.

Manual door locks

23.

To open the right-hand rear door, pull

the exterior handle.

The right-hand door can also be

opened from inside the vehicle by

pulling the interior handle.

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands