Suzuki Movano Owner'S Manual Download Page 113

Page: 113 / 353

Lighting

111

Automatic headlight activation

During poor lighting conditions the

headlights are switched on.
Additionally, headlights are switched

on if the windscreen wiper has been

activated for several wipes.

High beam

To change between low and high

beam, pull lever beyond the

resistance point.

High beam assist

This feature automatically activates

the high beam at night when vehicle

speed is faster than 45 km/h.
It switches automatically back to low

beam when:

● The camera in the windscreen

detects the lights of oncoming or

preceding vehicles.

● It is foggy or snowy.
● Driving in urban areas.

If there are no restrictions detected,

the system switches back to high

beam.

Activation

Turn the outer light switch to AUTO

then pull the lever to activate high

beam assist.
The control indicator

illuminates

continuously in the instrument cluster

when the assist is activated, while the

blue control indicator

103

illuminates when high beam is on.
Control indicator

103.

Note

Use of the system does not relieve

the driver from full responsibility for

vehicle operation.

Deactivation

Pull the lever again. Control indicator

extinguishes.

High beam assist is also deactivated

when the outer light switch is moved

out of the AUTO position or the

ignition is switched off.

Note

Depending on version, the system

can be also deactivated via the

Infotainment system. Refer to

Infotainment manual for further

information.

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands