Suzuki Movano Owner'S Manual Download Page 193

Page: 193 / 353

Infotainment system

191

Voice recognition

General information

The voice recognition function allows

to operate certain functions via voice

input.
To ensure that conversations held

inside the vehicle do not start

unintentional calls to a saved contact,

the voice recognition function must

first be activated via

on the column

controls.
Control elements overview

122.

NAVI 50 IntelliLink

Available depending on version, the

voice recognition function of the

handsfree phone system allows you

to operate certain functions of a

compatible smartphone via voice

input.
Refer to "Phone control" in this

section

193.

To confirm that a paired and

connected smartphone is compatible

with the voice recognition function,

touch

followed by

Setting(s).

Then select Connectivity followed by

View Bluetooth device list. The list

shows the paired devices and

appears alongside the name of the

smartphone to indicate compatibility.

Note

If supported, the language set on the

smartphone will automatically be

used by the Infotainment system for

voice recognition.

The navigation system can also be

operated using voice controls. Refer

to "Navigation control" in this section

192.

Prerequisites

The following prerequisites must be

met:

● The Bluetooth function of the

Infotainment system must be

activated.
Refer to "Bluetooth connection"

in the "Phone" section

197.

● The Bluetooth function of the

Bluetooth-enabled smartphone

must be activated and the

smartphone must have a 3G, 4G

or wi-fi connection (see

smartphone operating

instructions).

● Dependent upon the

smartphone, it may be required

to set the device to "visible" (see

smartphone operating

instructions).

● The smartphone must be paired

and connected to the

Infotainment system.

Help

For information and help with

activating and operating voice

controls, touch

followed by

Setting(s) then Connectivity.

Select Smartphone from the list (use

to search list), then select

access help.
A series of screens are displayed,

explaining how to use the voice

recognition function and information

on the following:

● switching on/off with steering

wheel/column controls

● compatible phones
● operation methods

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands