Suzuki Movano Owner'S Manual Download Page 191

Page: 191 / 353

Infotainment system

189

This menu option contains the

following information:

● speed limits
● phone country code

(International dialling code, e.g.

+49)

● emergency number (e.g. 112)
● legal restrictions, e.g.:

● vehicle equipment

requirements, e.g. warning

triangle, first aid kit, fire

extinguisher, spare bulbs,

high-visibility jacket etc.

● headlights legislation
● maximum blood alcohol level
● snow chains legislation
● winter tyres legislation

Help Nearby

This function allows you to search for

assistance near the current location.
When the Where am I? screen is

displayed, touch Help Nearby.

This menu option contains the

following information:

● Car repair around here (Vehicle

repair services)

● Health around here (Medical and

emergency services)

● Police around here (Police

stations)

● Petrol station around here (Fuel

stations)

Select the appropriate option to

access a list of local Points of Interest

(POI).
For information on Points of Interest

(POI), refer to (NAVI 50 IntelliLink)

"Destination input"

177.

Traffic information

NAVI 50 IntelliLink

Available depending on version, up-

to-date traffic information from local

sources can be received. Information

is provided for the current route or for

the current vehicle location.
During route guidance, touch

Options then select Current traffic, or

touch the traffic icon

on the map

screen. Traffic incidents along the

route and estimated delay times are

displayed.
The following options are available:

● Event list: Select to change event

display settings.

● Offer detour: Create an

alternative route to the selected

destination.

● Options: Access traffic options.

To access these traffic options at any

time, touch

followed by

NAVI /

Nav then Options. Then select

Traffic.

Touch

to return to route guidance.

NAVI 80 IntelliLink

Allows up-to-date traffic information

from local sources to be received.
From the Home page, touch MENU

then Navigation, followed by

Navigation Services. Then select

Traffic/HD Traffic.
The navigation system indicates

traffic incidents with voice messages,

the traffic information bar and also by

displaying symbols on the map.

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands