Suzuki Movano Owner'S Manual Download Page 132

Page: 132 / 353

130

Infotainment system

a short period after the last user input.

Depending on Infotainment system,

automatic switch-off occurs after

approx. 5 to 20 minutes.
Pressing

again will allow the

Infotainment system to remain on for

a further 5 to 20 minutes, depending

on Infotainment system.

Setting the volume

Turn

/ volume rotary knob.

Alternatively (with the steering

column controls), press

NAVI 50 IntelliLink:

Depending on version, it is possible to

set various volume levels individually

(including audio players, traffic

announcements, navigation

instructions, phone calls and

ringtone).
From the Home page, touch

Settings then Audio followed by

Sound.
Refer to (NAVI 50 IntelliLink) "Volume

settings"

138.

NAVI 80 IntelliLink:

To set various volume levels

individually (e.g. navigation

instructions, traffic announcements,

phone calls) from the Home page,

touch MENU then System followed by

Sound.
Refer to (NAVI 80 IntelliLink) "System

settings"

139.

Stored volume

When the Infotainment system is

switched off, the current volume is

stored.

Speed dependent volume

When speed dependent volume

(

139) is activated, the volume is

adapted automatically to compensate

for road and wind noise.

Mute

To mute the current audio source

(depending on Infotainment system),

press

briefly or turn knob fully

anticlockwise.
Alternatively (with the steering

column controls), press

press

and

simultaneously.

Unmute

To unmute (depending on

Infotainment system), briefly press

again or turn clockwise.

Alternatively (with the steering

column controls): Press

again or

press

and

simultaneously again.

Note

When a traffic announcement is

broadcast, the system is

automatically unmuted.
For further information, refer to

"Radio data system"

148.

Display screen operation

Radio 15 USB

● To move up/down in the display:

Turn OK.

● To confirm actions: Press OK.
● To cancel actions (and return to

previous menu): Press

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands