Suzuki Movano Owner'S Manual Download Page 187

Page: 187 / 353

Infotainment system

185

a more detailed overview of the

journey (e.g. traffic delays, fixed

and mobile speed cameras).
For further information, refer to

(NAVI 80 IntelliLink) "LIVE

services" in the "Usage" section

166.

Edit itinerary

NAVI 50 IntelliLink

This function makes it possible to

view and change the route plan to the

destination entered.
To access at any time, touch

followed by

NAVI /

Nav then

Route. Select Itinerary.
The following information will appear:

● direction change arrows
● road number
● distance before a direction

change

Touch Options to change and sort the

details of the route.

The following options are available:

● Summary

Shows each waypoint and the

destination, including the

waypoint distance, time left to

next waypoint and arrival time.

● Normal

Shows each manoeuvre, with

street or place names, distance,

and route section numbers.
This option also shows signpost

information, access and

manoeuvre restrictions,

warnings and system preference

information.

● Road list

Shows only the main sections of

the route using road names/

numbers.
This option also shows the length

of each section, time left to next

section, arrival time and average

direction.

Alternatively, these itinerary/route

options can be changed by touching

the "Direction and distance to next

change of direction" tab on the display

during route guidance. Select

Options to change and sort the details

of the route.
Refer to (NAVI 50 IntelliLink)

"Information on the display", "Map

screen" in the Usage section

166.

Edit route

To edit the route by modifying the list

of waypoints, touch

followed by

NAVI /

Nav, Route then Edit

Route on the display screen.
The following options are available:
Top

: Add waypoint

Bottom

: Add new destination

: Delete destination

: Change the route

departure address

(available depending on

version)

To change the order of the waypoints

in the list, touch Options followed by

Re-order then move the waypoints

up/down.
For the various methods of entering a

destination, refer to

(NAVI 50 IntelliLink) "Destination

input"

177.

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands