Suzuki Movano Owner'S Manual Download Page 158

Page: 158 / 353

156

Infotainment system

Disconnecting from USB socket

Playback is stopped immediately

when the audio device is withdrawn

from the USB socket.

Bluetooth music

General information

Bluetooth-enabled auxiliary audio

sources (e.g. music mobile phones,

MP3 players etc.) can be connected

wirelessly to the Infotainment system.

Important information

● The Infotainment system only

connects to Bluetooth devices

that support A2DP (Advanced

Audio Distribution Profile).

Connection issues may arise with

early versions.

● The Bluetooth device must

support AVRCP (Audio Video

Remote Control Profile)

version 1.0 or higher. If the

device does not support AVRCP,

only the volume can be controlled

via the Infotainment system.

● Before connecting the Bluetooth

device to the Infotainment

system, become acquainted with

its operating instructions for

Bluetooth functions.

Operation

Prerequisites

The following prerequisites must be

met, in order to control a Bluetooth-

enabled audio device via the

Infotainment system:

● The Bluetooth function of the

Infotainment system must be

activated.
Refer to "Bluetooth connection"

in the "Phone" section

197.

● The Bluetooth function of the

Bluetooth-enabled auxiliary

audio source must be activated

(see audio device operating

instructions).

● Dependent upon the audio

source, it may be required to set

that device to "visible" (see audio

device operating instructions).

● The audio source must be paired

and connected to the

Infotainment system.

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands