Suzuki Movano Owner'S Manual Download Page 164

Page: 164 / 353

162

Infotainment system

When viewing a photo/

slideshow, the pop-up menu also

allows to set zoom level and

display all photos in thumbnail

form.

Photo settings - refer to

(NAVI 80 IntelliLink) "System

settings"

139.

Playing movies

NAVI 50 IntelliLink

To access the "Video" menu from the

Home page, touch Media and then

Video.

Note

Playback is only possible when the

vehicle is stationary.

The following three tabs are

available:

● Player: Display the video screen.
● List: Display a list of all available

videos.

● Options: Display the playback

settings and detailed video

information.

The video screen includes the

following options:

● Scroll bar for time elapsed: Scroll

through videos.

●

: Play video from the

beginning / play previous video /

fast rewind.

●

: Pause video.

●

: Play next video / fast forward.

●

(

: Adjust the brightness. To

continue the video playback,

touch the screen.

●

)

: View the video in full screen.

NAVI 80 IntelliLink

To access the "Videos" menu from

the Home page, touch MENU and

then Multimedia, followed by Video.

Note

Playback is only possible when the

vehicle is stationary.

Select the connected source device

(e.g. USB) to access individual or all

compatible videos on the device.

The display includes the following

options:

●

: Move to previous/next

video.

●

: Pause video.

● Scroll bar for time elapsed: Scroll

through videos.

● New selection: Choose another

video from the connected source

device.

● Full screen: Switch to full screen

display.

●

: Return to previous screen.

●

: Open pop-up menu; To

change the source device or

access the video settings.
During video playback, the pop-

up menu also allows to return to

the list of videos.

Video settings - refer to

(NAVI 80 IntelliLink) "System

settings"

139.

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands