Suzuki Movano Owner'S Manual Download Page 152

Page: 152 / 353

150

Infotainment system

News

If News is switched on:

● News announcements from

certain FM radio stations (and

DAB stations, if available) are

broadcast automatically.

● Radio and auxiliary audio source

playback is interrupted for the

duration of the traffic

announcement.

Text information (Radio text)

Certain FM radio stations (and DAB

stations, if available) issue text

information relating to the broadcast

program (e.g. song name).

NAVI 80 IntelliLink

Configuring RDS

To access the Radio settings menu

from the Home page, select MENU

then Multimedia, followed by

Settings then Radio.
Depending on version, touch

open a pop-up menu, and access the

'Radio settings' option.

The following radio settings can be

updated:

● switch searching for Alternative

Frequencies (AF) on/off

● switch i-traffic (Traffic program

information) on/off

● switch programme type (PTY)

on/off

● switch simulcast on/off
● display i-announcement

information (e.g. Area weather

information, Event information)

● update list of saved radio stations

Alternative Frequency (AF)

Switch on the RDS-AF function to

always tune into the best receivable

broadcasting frequency of the chosen

station.
i-traffic (Traffic program information)

Radio traffic service stations are FM

RDS stations that broadcast traffic

news.
Switch on I-Traffic to automatically

receive traffic bulletins when they are

broadcast.

Programme type search (PTY)

Switch on PTY to display the type of

programme (e.g. news, sport)

currently being broadcast
Update radio list

Refer to (NAVI 80 IntelliLink)

"Autostore lists"

147.

Simulcast

Switch on the simulcast function to

automatically change from a DR

(digital radio) station to the same

station on the FM waveband in the

event of a loss of reception.
i-announcement

Select to display information such as

weather or events in the vicinity.

Text information (Radio text)

Certain FM radio stations issue text

information relating to the broadcast

program (e.g. song name).
To check for text information, from

any radio mode (e.g. Preset, List,

Frequency) touch

to open a pop-up

menu, and access the text

information option, by selecting e.g.

"Show radio text".

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands