Suzuki Movano Owner'S Manual Download Page 302

Page: 302 / 353

300

Vehicle care

2. Install the wheel wrench

(depending on vehicle, attach

wheel wrench to adapters)

ensuring that it is located securely

and loosen each wheel bolt / nut

by half a turn.

3. Vehicles with Front-wheel drive:

If equipped, attached heightener

to lifting pad when changing a

front wheel.
Raise vehicle by placing lifting

pad spigot of the jack (vehicle

tools

290) under the jacking

hole located nearest the wheel

concerned.
Ensure the jack is positioned

correctly. The jack base must be

on the ground directly below the

jacking hole in a manner that

prevents it from slipping.
Attach wheel wrench onto the jack

and raise the vehicle by turning

the wrench until the wheel is clear

of the ground.

Vehicles with Rear-wheel drive:
Pay attention to the operating

instructions supplied with the

hydraulic jack (vehicle tools

290) and assemble the parts

required as specified.
Position the adapter at the jacking

hole located nearest the wheel

concerned.
Ensure the jack is positioned

correctly. The jack head must be

level with the jacking hole. Pump

the jack by pressing the wheel

wrench / adapters, to position the

base plate correctly.

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands