Suzuki Movano Owner'S Manual Download Page 200

Page: 200 / 353

198

Infotainment system

● Dependent upon the mobile

phone, it may be required to set

the device to "visible" (see mobile

phone operating instructions).

● The mobile phone must be paired

and connected to the

Infotainment system.

Activating Bluetooth function of

the Infotainment system

Radio 15 USB

To enable the Infotainment system to

recognise and operate a Bluetooth-

enabled mobile phone, the Bluetooth

function must first be activated.

Deactivate the function if not

required.
Press TEL and select Bluetooth by

turning and pressing OK.
Select ON or OFF and confirm by

pressing the knob.

NAVI 50 IntelliLink

Touch

followed by

Settings.

Select Connectivity to display the

following options:

● View Bluetooth device list
● Search for Bluetooth device

● External device authorization
● Change passkey
● Smartphone

Available depending on version.

For help with activating and

operating voice controls - refer to

"Voice recognition"

191).

When the Connectivity screen is

displayed, Bluetooth-enabled

devices can be paired to the

Infotainment system.

NAVI 80 IntelliLink

To access the Phone settings menu

from the Home page, touch MENU

then

Phone followed by Settings.

The following options are displayed:

● Manage devices
● Sound levels
● Voice mail
● Activate Bluetooth
● Automatically download phone

data (on/off)

Select Turn Bluetooth on to tick the

box ☑ alongside it. Bluetooth-enabled

devices can now be paired to the

Infotainment system.

Refer to (NAVI 80 IntelliLink) "Phone

settings" in the "Operation" section for

further information

201.

Pairing a mobile phone to the

handsfree phone system

In order to use the handsfree phone

system, a connection must be set up

between the mobile phone and the

system via Bluetooth, i.e. the mobile

phone must be paired to the vehicle

before using it. For this purpose, the

mobile phone must support

Bluetooth. Refer to the operating

instructions for the mobile phone.
To set up a Bluetooth connection, the

handsfree phone system must be

switched on and Bluetooth must be

activated on the mobile phone.

Note

If another phone is automatically

connected during a new pairing

procedure, it will automatically be

disconnected, to allow the new

pairing procedure to continue.

Pairing enables the handsfree phone

system to recognise and store a

mobile phone in the device list. A

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands