Suzuki Movano Owner'S Manual Download Page 116

Page: 116 / 353

114

Lighting

Front fog lights operate with engine

running and headlights switched on.

Rear fog light

Turn inner switch to position

and

release.
Rear fog light operates with engine

running and headlights switched on.

Reversing lights

The reversing lights come on when

the ignition is on and reverse gear is

selected.

Misted light covers

The inside of the light covers may mist

up briefly in poor, wet and cold

weather conditions, in heavy rain or

after washing. The mist disappears

quickly by itself. To help, switch on the

headlights.

Interior lighting

Interior lights

Courtesy lights illuminate when the

vehicle is unlocked with the remote

control or the front doors are opened.
When the doors are closed, the

courtesy light extinguishes after a

delay or immediately after the ignition

is switched on.

Front courtesy light

central posi‐

tion

: automatic switching

on and off

press

: on

press 0

: off

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands