282
Vehicle care
Side turn lights
1. Push the lamp assembly to the
right and pull at the left-hand side
of the lamp assembly to release
from the aperture.
2. Detach wiring connector from
lamp assembly.
3. Remove bulb holder from lamp
assembly by rotating 90° and
renew bulb.
4. Install bulb holder in lamp
assembly.
5. Attach wiring connector to lamp
assembly.
6. Insert lamp assembly into
aperture and push to the left to
secure.
Mirror turn lights
1. Move the lower mirror assembly
from the front to access the screw.
2. Remove the screw using a torx
screwdriver.
3. Remove bulb holder from the rear
of the lower mirror assembly.
4. Renew bulb.
5. Install bulb holder in lower mirror
assembly.
6. Replace the screw.
Centre high-mounted brake
light
1. Remove cover from the inside of
the rear door.
2. Unscrew the nut from the locating
pin at the rear of the lamp
assembly.
Summary of Contents for Movano
