Suzuki Movano Owner'S Manual Download Page 252

Page: 252 / 353

250

Driving and operating

For safety reasons the cruise control

cannot be activated until the brake

pedal has been operated once.
Do not use the cruise control if it is not

advisable to maintain a constant

speed.
With manual transmission

automated, only activate cruise

control in automatic mode.
Control indicators

and

103.

Switching on the system

Press

, control indicator

illuminates green in the instrument

cluster.

Cruise control is now in standby mode

and a corresponding message

appears in the Driver Information

Centre.

Accelerate to the desired speed and

press

]

. The current speed is

now stored and maintained and the

accelerator pedal can be released.

Control indicator

illuminates green

in the instrument cluster together with

and a corresponding message

appears in the Driver Information

Centre.
Vehicle speed can be increased by

depressing the accelerator pedal.

The stored speed flashes in the

instrument cluster. When the

accelerator pedal is released, the

previously stored speed is resumed.
Cruise control remains activated

while gearshifting.
The speed is saved until the ignition

is switched off.

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands