Suzuki Movano Owner'S Manual Download Page 131

Page: 131 / 353

Infotainment system

129

Note

If equipped, the voice recognition

button

may be located on the

steering column controls.

Usage

Infotainment controls

The Infotainment system is operated

via buttons, rotary knobs and/or

display menus.
Inputs are made via:

● the central control unit in the

instrument panel

122, or

● the controls on the steering

column

122

● the voice recognition system (if

available)

191

● the touchscreen

(NAVI 50 IntelliLink,

NAVI 80 IntelliLink)

136

Note

Only the most direct ways for menu

operation are described in the

subsequent chapters. In some

cases, there may be other options.

Switching the Infotainment

system on or off

Press

to switch the Infotainment

system on.
The previously used audio source is

active.
Press

(or, depending on

Infotainment system, press and hold)

to switch the Infotainment system off.

Note

The clock and/or outside

temperature may be displayed when

the Infotainment system is switched

off (depending on version).

NAVI 50 IntelliLink:

The Infotainment system

automatically switches on/off when

the ignition is switched on/off. Press

instead, if required.

Press and hold

for 5 seconds to

restart the system.
NAVI 80 IntelliLink:

The Infotainment system switches on

automatically when the ignition is

switched on (depending on version).

Press

instead, if required.

The following options may be

displayed (depending on version):

● Change settings (to authorise or

reject data sharing)
The system displays a screen to

confirm the authorisation of data

sharing after touching Change

settings.

Note

When data sharing is switched off,

certain features may not operate

correctly.

● Language (to change the system

language)

● Done (to continue to the Home

page)

● Help (to see more detailed

information)

The Infotainment system

automatically switches off when the

ignition is switched off and the driver's

door is opened. Press

instead, if

required.

Automatic switch-off

With the ignition off, if the

Infotainment system is switched on

with

, it will switch-off automatically

Summary of Contents for Movano


































































































































































































































































































































































Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands

Suzuki Movano, Owner'S Manual

Search results

Summary of Contents for Movano

Reviews:

Related manuals for Movano

Brands by name

Popular brands