Supero SUPER P6SLA, User'S And Bios Manual

Page: 31 / 91

SUPER P6SLA/P6SLE User’s Manual
2-6
OEM Pentium II and Heat Sink Support
The heat sink support shown on Figure 2-5 consists of a top bar
and a base bar with four posts on the top bar and two posts on
the base bar. The two posts on the base snap into the
motherboard. Install the two pins into the base bar. Insert the
Pentium II with the heat sink on it into Slot 1. Install the top
support bar. The four top posts should be close to Slot 1. The
bottommost row of fins in the heat sink should fit between the top
support bar and the bottom support bar as shown in Figure 2-6.
Figure 2-5. Heat Sink Support
Heat Sink
Figure 2-6. Pentium II Heat Sink