Supero SUPER P6SLA, User'S And Bios Manual

Page: 3 / 91

Preface
About This Manual
This manual is written for system houses, PC technicians and
knowledgeable PC end users. It provides information for the
installation and use of the SUPER P6SLA/P6SLE motherboard.
SUPER P6SLA/P6SLE supports Pentium II 233/266/300/333 MHz.
The Pentium II processor with the Dual Independent Bus Architec-
ture is housed in a new package technology called the Single
Edge Contact (S.E.C.) cartridge. This new cartridge package and
its associated "Slot 1" infrastructure will provide the headroom for
future high-performance processors.
Manual Organization
Chapter 1, Introduction, describes the features, specifications and
performance of the SUPER P6SLA/P6SLE system board, provides
detailed information about the chipset, and offers warranty infor-
mation.
Refer to Chapter 2, Installation, for instructions on how to install
the Pentium II processor, the retention mechanism, and the heat
sink support. This chapter provides you with instructions for
handling static-sensitive devices. Read this chapter when you
want to install or remove DIMM memory modules and to mount
the system board in the chassis. Also refer to this chapter to
connect the floppy and hard disk drives, IDE interfaces, parallel
port, serial ports, as well as the cables for the power supply,
reset cable, Keylock/Power LED, speaker and keyboard.
If you encounter any problem, please see Chapter 3, Trouble-
shooting, which describes troubleshooting procedures for video,
memory, and the setup configuration stored in memory. Instruc-
tions are also included on contacting a technical assistance
support representative, returning merchandise for service and the
BBS# for BIOS upgrades.
i i i