Supero SUPER P6SLA, User'S And Bios Manual

Page: 84 / 91

B-3
Appendix B: AMI BIOS POST Diagnostics Error Messages
Check
Point
Description
28 Initialization before setting the video mode is complete.
C o n f i g u r i n g t h e m o n o c h r o m e m o d e a n d c o l o r m o d e
settings next.
2A Bus initialization system, static, output devices will be
done next, if present.
2B Passing control to the video ROM to perform any
required configuration before the video ROM test.
2C All necessary processing before passing control to the
video ROM is done. Looking for the video ROM next
and passing control to it.
2D The video ROM has returned control to BIOS POST.
Performing any required processing after the video
ROM had control.
2E Completed post-video ROM test processing. If the
E G A / V G A c o n t r o l l e r i s n o t f o u n d , p e r f o r m i n g t h e
display memory read/write test next.
2F The EGA/VGA controller was not found. The display
memory read/write test is about to begin.
30 The display memory read/write test passed. Look for
retrace checking next.
31 The display memory read/write test or retrace checking
failed. Performing the alternate display memory
read/write test next.
32 The alternate display memory read/write test passed.
Looking for alternate display retrace checking next.
34 Video display checking is over. Setting the display
mode next.
37 The display mode is set. Displaying the power on
message next.