Supero SUPER P6SLA, User'S And Bios Manual

Page: 59 / 91

BIOS User's Manual
5-4
5-1-2 Advanced Setup
Quick Boot
Set this option to Enabled to permit AMIBIOS to boot within 5
seconds. The Settings are Disabled or Enabled.
Pri Master ARMD Emulated as
Pri Slave ARMD Emulated as
Sec Master ARMD Emulated as
Sec Slave ARMD Emulated as
Options for Pri Master ARMD Emulated as, Pri Slave ARMD
Emulated as, Sec Master ARMD Emulated as and Sec Slave
ARMD Emulated as are Auto, Floppy and Hard disk.
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
The options for 1st Boot Device are Disabled, 1st IDE-HDD, 2
IDE-HDD, 3rd IDE-HDD, 4th IDE-HDD, Floppy, ARMD-FDD,
ARMD-HDD, ATAPI CD ROM, SCSI, Network or I
2
O. The options
for 2nd Boot Device are Disabled, 1st IDE-HDD, 2nd IDE-HDD,
3rd IDE-HDD, 4th IDE-HDD, Floppy, ARMD-FDD, ARMD-HDD or
ATAPI. The options for 3rd Boot Device are Disabled, 1st IDE-
HDD, 2nd IDE-HDD, 3rd IDE-HDD, 4th IDE-HDD, Floppy, ARMD-
FDD, ARMD-HDD or ATAPI CD ROM. The options for the 4th
Boot Device are Disabled, 1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-
HDD, 4th IDE-HDD, Floppy, ARMD-FDD, ARMD-HDD. The Dis-
abled option in the 4th boot device means that setup will not be
considered during the boot process.
1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD and 4th IDE-HDD are
the four hard disks than can be installed by the BIOS. 1st IDE-
HDD is the first hard disk installed by the BIOS, 2nd IDE-HDD is
the second hard disk, and so on. For example, if the system has
a hard disk connected to Primary Slave and another hard disk to
Secondary Master, then 1st IDE-HDD will be referred to as the
hard disk connected to Primary Slave and 2nd IDE-HDD will be
referred to as the hard disk connected to the Secondary Master.
3rd IDE-HDD and 4th IDE-HDD are not present. Note that the
order of the initialization of the devices connected to the primary
and secondary channels are Primary Master first, Primary Slave
second, Secondary Master third, and Secondary Slave fourth.