Supero SUPER P6SLA, User'S And Bios Manual

Page: 27 / 91

SUPER P6SLA/P6SLE User’s Manual
2-2
Retention
Mechanism
Large peg and hole
the fan heatsink supports. Notice that one hole and the base of
one peg are larger than the other hole and peg base. Push each
peg into its hole firmly until you hear it "click" into place.
Figure 2-1. Mounting the Pegs
!
2-2 Pentium II Processor Installation
When handling the Pentium II processor, avoid
placing direct pressure on the label area of the fan.
1. Check the Intel boxed processor kit for the following items: the
processor with the fan heatsink attached, two black plastic pegs,
two black plastic supports, and one power cable.
2. Install the retention mechanism attach mount under the
motherboard, before mounting the motherboard into the chassis.
Do not screw too tightly. Mount the two black plastic pegs onto
the motherboard (Figure 2.1). These pegs will be used to attach