Supero SUPER P6SLA, User'S And Bios Manual

Page: 37 / 91

SUPER P6SLA/P6SLE User’s Manual
2-12
Power Save State Select
Refer to Table 2-10 on how to set JP20. Power Save State Select
is used when you want the system to be in power off state the
first time you apply power to the system or when the system
comes back from AC power failure. In the Power Save State the
power will not come on unless you hit the power switch on the
motherboard. PIIX4 control is used if you want the system to be
in power on state the first time you apply power to the system or
when the system comes back from AC power failure.
Table 2-10. JP20 Pin Definitions
Connector J u m p e r
N u m b e r Position Function
JP20 1-2 PIIX4 Ctrl
2-3 Save PD State
Table 2-11. Chassis Intrusion Detector Settings
J u m p e r Definition
OFF Normal
ON Intrusion
Speaker Connector
The speaker connector is located on pins 10 to 13 of JF1. See
Table 2-9 for pin definitions.
Table 2-9. Speaker Connector Pin Definitions
Pin
N u m b e r Function Definition
10 + Red wire, speaker data
11 K e y No connection
12 VCC Speaker data
13 GND Black wire
Chassis Intrusion Detector
The Chassis Intrusion detector is located on JL1. See Table 2-11
for pin definitions.