Supero SUPER P6SLA, User'S And Bios Manual

Page: 28 / 91

2-3
Chapter 2: Installation
3. Slide a black plastic support onto each end of the fan heatsink,
making sure that the hole and clip are on the outside edge of the
support. If the supports are reversed, the holes will not line up
with the pegs on the motherboard. Slide each support toward the
center of the processor until the support is seated in the outside
groove in the fan housing.
Figure 2-2. Support for Fan Heatsink
Top of processor
Groove in fan housing
Hole and clip on outside edge