Supero SUPER P6SLA, User'S And Bios Manual

Page: 73 / 91

BIOS User's Manual
5-18
Reserved Memory Address
This option specifies the beginning address (in hex) of the
reserved memory area. The specified ROM memory area is
reserved for use by legacy ISA adapter cards. The settings are
C0000, C4000, C8000, CC000, D0000, D4000, D8000, or DC000.
5-1-6 Peripheral Setup
OnBoard FDC
This option enables the FDC (Floppy Drive Controller) on the
motherboard. The settings are Auto (AMIBIOS automatically
determines if the floppy controller should be enabled), Disabled,
or Enabled.
OnBoard Serial Port 1
This option specifies the base I/O port address of serial port 1.
The settings are Auto (AMIBIOS automatically determines the
correct base I/O port address), Disabled, 3F8h, 2F8h, 3E8h, or
2E8h.
OnBoard Serial Port 2
This option specifies the base I/O port address of serial port 2.
The settings are Auto (AMIBIOS automatically determines the
correct base I/O port address), Disabled, 3F8h, 2F8h, 3E8h, or
2E8h.
Serial Port 2 Mode
The settings are Normal, Sharp-IR, IrDA, or TV Remote.
IR Duplex Mode
The settings are Half or Full. Note: The Optimal and Fail-Safe
default settings are N/A.
IR Receiver Pin
The settings are IRRX1 or IRRX2. Note: The Optimal and Fail-
Safe default settings are N/A.
OnBoard Parallel Port
This option specifies the base I/O port address of the parallel port
on the motherboard. The settings are Auto (AMIBIOS automati-
cally determines the correct base I/O port address), Disabled,
378, 278, or 3BC.